Belongs to a set of work flow of imported cooler

Imported cooler is a kind of oil cooling equipment commonly used in hydraulic system and lubricating system. The equipment can make two kinds of fluid medium with a certain temperature difference achieve heat exchange, so as to reduce the oil temperature and ensure the normal operation of the system. A heat exchanger used to cool fluid, usually with water or air as coolant to remove heat. It has been widely used as supporting equipment for large electric appliances such as high-power silicon rectifier, induction furnace, intermediate frequency furnace and so on, and as pure water, water air, oil water and oil air cooling device for cooling protection machine.

How to use imported cooler correctly?

(1) Check whether the backwater and vent valve are flexible and easy to use and the switch position, and whether the pressure gauge and thermometer are fully installed.

(2) Check whether the foundation and support are firm, and whether the bolts of each part are fully buckled and fastened.

(3) When put into use, first cast cold flow, then cast hot flow.

(4) in the use of cold medium or hot medium, first of all to ensure that the secondary line smooth, and then slowly open the outlet valve, check no problem after opening the entrance valve, be sure to slowly open, to prevent pressure.

Each product work has its own set of work flow, imported cooler is the same.

(1) After the pressure test of the cooler is qualified, it can be put into use, and internal water storage can be used in the front row.

(2) Check whether the inverted shower and vent valve are flexible and easy to use and the switch position, and whether the pressure gauge and thermometer are all installed.

(3) Check whether the foundation and support are firm, and whether the bolts of each part are fully buckled and fastened.

(4) Start to put into use, first cast cold flow, then cast hot flow.

(5) use cold medium or hot medium.

At this point, first of all, to ensure that the secondary line smooth, and then slowly open the export valve, check no problem after opening the entrance valve, to prevent pressure. Pay attention to observe the change of equipment during operation.

Inlet cooler is the use of air as a heat exchange medium for heat exchange, heat is taken away by air, so it is also called air cooler. Its heat dissipation mainly depends on the heat exchange area and air volume of its component radiator. In simple terms, the same heat exchange area, the greater the air volume, the better the heat dissipation. The same air volume, the greater the heat exchange area, the better the heat dissipation.