An industrial oil cooler is a refrigeration system used to cool process fluids and dehumidify the air in an industrial facility. More efficient than ordinary refrigeration machines, compressors can operate without cylinders, pistons or valves. Use fans to dissipate heat from the cooling system. The equipment is A standard A-type screw compressor and shell and tube heat exchanger air conditioning system, they have strong cooling capacity, low noise, low vibration, high efficiency and high reliability. These units are equipped where there is no available liquid source for cooling condensers.
Industrial oil cooling machine according to the principle of refrigeration system, the low temperature low pressure liquid refrigerant in the evaporator and the surrounding water oil absorption of heat, heat exchange evaporator evaporation into the low temperature low pressure gas, evaporation process cold media, constant temperature low temperature low pressure gas refrigerant into the compressor, the compressor compressed, compressed into high temperature and high pressure gas, and then into the condenser, Medium for heat transfer in the condenser with indoor, high temperature and high pressure of the gaseous part of heat is absorbed by the medium, medium temperature, the refrigerant condenser heat release into high temperature and high pressure liquid, condenser constant temperature process, and then into the expansion valve throttling, throttling is a process of rapid cooling, cold media into the low temperature low pressure liquid, After this process, the refrigerant enters the evaporator for heat exchange and evaporation, so as to realize the whole process of the refrigeration system. This cycle is continuous, and the oil can be continuously refrigerated.
Cleaning steps:
Cleaning is mainly aimed at the connection part of the equipment and the condenser, find the water inlet direction of the condenser and connect it to the water inlet or outlet of the pump, and then use tools to heat the pipeline. First clean with water